Horizontal multistage centrifugal pump CHDF

Application

CHDF type pump are mainly used in industrial field
Air-conditioning system
Cooling system
cleaning Water treatment ( Water purification)
Aquiculture
Fertilizing / metering system
environmental application
Other special application
Applicable medium
Thin and clean non-flammable and non-explosive liquid without solid granules and fibers
Mineral water , soft water , pure water , edible vegetable oil and other light chemical mediums When the density or viscosity of to-be-conveyed Iiquid is larger than that of water , it is necessary to select a driving motor of high-power
Whether a specific liquid is suitable for the pump depends on many factors , among which the most important ones are chlorine content , PH value , temperature solvent and oil content

PUMP

Horizontal multistage non-self-priming centrifugal pump , attached with long shaft electric motor.
Compact structure renders small size of pump : axial inlet and radial outlet.

Curve conditions

Following conditions are suitable for the performance curves shown above
All curves are based on the measured values of 50HZ :constant motor speed 2900r / min , 60 Hz : constant motor speed 3500 r / min;
Curve tolerance in conformity with IS09906 : 2012 . 3B.
Measurement is done with 20C air-free water . kinematic viscosity of Imm / sec.
The operation of pump shall refer to the performance region described by the thickened curve to prevent overheating due to too small flow rate or over load of motor due to too large flow rate.

Motor

TEFC motor 2-pole
Protection class : IP55
Insulation class : F
Standard voltage 50HZ : 1x220-240v3X220-240V / 380-415Ve
Standard voltage 60HZ : 1 X220-240V3X220-240V / 380-415V
Single phase motor ( max ) : 2 . 4kw
Operation condition
Liquid temperature Normal temperature type : -15℃ - + 70℃ Hot water type : -15℃- + 105℃ Ambient temperature : up to + 40℃
Max operation pressure : 10 bar
Max inlet pressure is limited by max operation pressure